Capped WPC DECKING 22*140mm

Choose KSL WPC decking, Creating a life that is close to nature. 

Let you really get the feeling of wood

KSL WPC co-extrusion WPC decking board or second generation WPC. Comparing with the traditional WPC there is protective layer which is modified PE, this protective layer makes the products unparalleled performance and long-lasting aesthetics.

Item No.: KSL-GB22-140C

Board Width: 140mm

Board Thickness: 22mm

Board Length: 2m, 2.2, 2.4, 2.8,2.9, 3m, 3.66m (12ft), 4m, 4.88m (16ft), 5m, 5.8m ect

Availability

WPC boards are available in various sizes and colors, allowing us to select boards that complement your interior seamlessly.

WPC decking (Wood Plastic Composite Decking) – Co-extrusion Composite Decking is a kind of new eco-friendly landscaping material which is produced under high temperature and pressure from the mixture of HDPE and wood fiber.

At present, our products are mainly exported to UK, USA, Germany, Australian, UAE, Tailand and other global markets. Our hot sell products are available in 15-20days for 1*20GP.

KSL WPC Composite Decking/WPC Decking Is Perfectly Suitable For Outdoor Use:

Low Maintenance and durable: No more paints
Weather-Resistant: No splinters or cracks
Natural: Beautiful appearance of wood
Safe: Anti-slip,eco-friendly

Standard available colors, or customized

Co-extrusion wpc patterns

Application:

KSL WPC can be widely used in the garden, square, balcony, terrace, walkway, landscape and so on.

Why Choose KSL WPC Decking?

Firstly, our raw materials are mixed at high temperature. And we will use a tan which load 15tons to mix again. This process is not available in general factories. Its advantage is that the uniform distribution of the mixture will be better. And the color will be same for this 15tons products. The moisture of the raw materials can be removed quite effectively to make the molecular structure more stable and tight. The expansion coefficient of the product during outdoor use will be less than that of similar products, and the aging speed will be reduced accordingly.

Secondly, HDPE is an important main material of WPC, which directly leads to the advantage of product quality. We use the first grade HDPE cable leather material. Many factories use PP or secondary material to produce. Under normal natural environment, HDPE has excellent weather resistance. For similar products, HDPE is resistant to low temperature impact.

Thirdly, the surface treatment of 3D embossed decking that our factory uses 3M soft sanding cloth roller, the general factory is treated with sand belt. 3M soft roller treatment has the advantage that the surface 3D effect is real, and the peeling effect is good, the sand belt is peeled rough surface, strong plastic, the advantage is low processing cost.

Package:

Installation:

1.  Before installing the joist, make sure the ground is flat and solid so that the joist can be fastened tightly on the ground. Then dig holes with percussion drill in the deck area and bury the plastic tube into the holes.
   2. Take the buried expansion tube as center, put the joist stably on the center line, pierce the joist with pistol drill and nail the screw into the expansion tube.
   3. Nail the expansion screw into the top of the vertical joint of two joists.
   4. Put flat the deck along the vertical direction of joists, the ending deck can be fixed on the joist with screw to make sure the accuracy of it being the base floor for other decks.
   5. Install clips on the other side of the first deck, and start installing decks in order.
   6. Install 2 joists in the longitudinal joint of two decks.
   7. To avoid possible deformation caused by temperature change, joists can not be tied too closely.
   8. Outside the last deck, use the same installation method as that of the first deck, install edge seal and terminal sealing board.

   
   

Accessories

Exhibition: